4115T Light-Duty Flat Panel Thinline Industrial PCs
The 4115T IPC offers a 15" LCD Flat Panel Touchscreen and a powerful Intel processor with a wide range of features and an expansion slot.

 

FEATURES

Higher Performance

The 2.0 GHz Intel Pentium 4 CPU with 512 KB cache and 533 MHz system bus drives the fastest and most demanding applications.

Pre-loaded Operating Systems

All 4115T systems come standard with either Windows 2000 or Windows XP pre-loaded. The unit is also available with no operating system.

Sharp, Easy-to-Read Displays

A bright 15" TFT screen can display complex operations with clarity.
 

Full Complement of I/O Ports

The 4115T comes standard with an extensive array of I/O ports, including two high-speed RS-232 ports, one configurable RS-232/422/485 port, one parallel port, two USB 2.0 ports, PS/2 mouse & keyboard ports, one 10/100 Mbps Ethernet port, one VGA port, and audio I/O (input, output, and mic).

The VGA port can be used to connect a VGA monitor. The built-in display and an external monitor can be used simultaneously (both showing the same image).
 

Cooling Enhancements

The 4115T has a faster, more powerful CPU which generates more heat than units with lesser performing CPUs. Using Xycom's expertise and experience, we have added a secondary system fan, more LCD venting, and a direct CPU vent channel to dissipate the extra heat.

When installing a higher performing CPU equipped unit into an enclosure, extra care should be exercised to ensure that the ambient air around the unit (inside your enclosure, not outside the enclosure) does not exceed 50?C. Exceeding 50?C may cause premature degeneration of the unit.

Consult your enclosure manufacturer for proper sizing and/or cooling options. The product specifications and ratings section of this datasheet contains information your enclosure manufacturer will require.

ADDITIONAL FEATURES


    • 15" flat panel TFT XGA (1024x768) color display
    • Analog resistive touchscreen
    • Intel Pentium 4, 2.0 GHz CPU, 512 KB cache, 533 MHz system bus
    • 4x AGP Video Controller with up to 64 MB Video RAM (shared with system RAM, 8 MB base)
    • Up to 1 GB DRAM (256 MB std)
    • VGA port for remote monitor
    • Supports using remote monitor and built-in display simultaneously
    • Preloaded with Windows 2000 operating system (option to load Windows XP*)
    • One half-length PCI expansion slot
    • 40 GB internal hard drive
    • Side accessible 1.44 MB floppy drive and CD-ROM drive (with CD-R/W, DVD, and DVD-R/W upgrade options)
    • Type II CompactFlash?card slot (can accommodate IBM Microdrive?
    • Two RS-232 ports
    • One configurable RS-232/422/485 port
    • Parallel port
    • Two USB 2.0 ports
    • 10/100 BaseT Ethernet
    • Audio input/output/mic
    • PS/2 keyboard & mouse ports
    • Software programmable watchdog timer
    • Mounted with mounting clips or standard 75/100 mm VESA arm
    • Power cable and drivers included
    • 100-240 V AC power supply
    • NEMA 4/4X/12, IP65 front panel
    • 1-year warranty


    * Important Notice for XP configurations: Certain Microsoft?software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsoft's privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of this computer, or may be completed by Internet or telephone (toll charges may apply).

TECHNICAL SPECIFICATIONS:

Display: 15" LCD color display, 1024 x 768 (XGA)
Operator Input: Analog resistive touchscreen
Processor: Intel Pentium 4, 2.0 GHz
Preloaded OS*: None, Windows 2000, or Windows XP
Expansion: One half-length PCI

* The 4115T does not fully support DOS. DOS screens will not display full screen, all drivers are not available, and some DOS fonts may not be supported.

SPECIFICATIONS:

Electrical:
AC power: 100-240 V AC, 3.0 A max., 125 W nominal*, 50/60 Hz

* Nominal Power is measured for a standard minimum configuration only. Any additional expansion and/or devices will increase the input power required.

STANDARDS & RATINGS

Front Panel:
NEMA 4/4X/12

COMPLIANCE

- CE (EN 55022, Class A
- EN 6100-6-2
- IEC 60950-1
- EN 61000-3-2, Class A
- EN 61000-3-3)

FCC (47 CFR, Part 15, Class A)

Safety Agency Approvals:
- UL (UL 508) Listed
- cUL (CSA-C22.2, #142) Listed

DIMENSIONS

Height: 12.17"(309.0 mm)
Width: 16.14"(410.0 mm)
Depth: 4.25"(108.0 mm)
Mounting Depth: 4.00"(102.6 mm)
Weight: 22 lbs (9.98 kg)

Mounting Dimensions (cutout):
Height: 15.2" (386.1 mm)
Width: 11.2" (284.5 mm)

Mounting Options:
The 4115T is designed to be mounted directly into an equipment panel without requiring special mounting plates or brackets. It can also be mounted on a wall with the wall-mount adapter included in the mounting kit or it can be mounted on a standard 75/100 mm VESA swing or pendent arm. The 4115T is not NEMA rated if mounted outside of a panel.

WARRANTY

The 4115T carries a one-year parts & labor warranty.

HOW TO ORDER

Base Order Number: 4115T-2000-256-2K

Description: 4115T Industrial PC with a Pentium 4 2.0 GHz CPU, 256 MB DRAM, 40 GB hard drive, 1.44 MB floppy drive, CD-ROM, and Windows 2000 operating system.
 

 

REFERENCE LIBRARY:


4115T Datasheet

4115T User Manual

4115T Hi Res JPEG

Back to IPC Home
Copyright © 1999-2001 Xycom Automation Corporation. All rights reserved.